OKJSOHI Van Gogh Sunflower Window Privacy Film, Rainbow Window Clings, 3D Decorative Window Vinyl, Stained Glass Window Decals, Static Cling Window Sticker Non-Adhesive W23.6 x H47 inch

Frosted stained glass Window Film is designed to give a traditional and contemporary style to your windows and doors, whether for some privacy, to block out an unsightly view or for decorative purposes. Besides prevent UV rays, it can also cut out a large proportion of the unwanted glare, whilst still allowing natural light to pass through. It will work on any smooth glass surface and can be used anywhere in the home, requires no additional cleaning and can be installed at a fraction of the cost. Step 1: Carefully measure the height and width of the glass surface. Step 2: Cut the film to the dimensions, leaving an extra 1 inch around all sides. You’ll be able to trim the edges down to size in the final step. Step 3: Thoroughly clean the surface of the glass to remove any trace of dust, grime and grease. Step 4: Slowly peel back the liner, wetting the static side of the film very thoroughly as you peel down. Step 5: Thoroughly spray and soak the glass surface and the static side of the film with the water mixture. Wetter is better! Step 6: Pick up the film by the top corners, keeping it straight and level. Place the wet film onto the wet surface. Step 7: Slide a squeegee over the wet film to smooth out and press the film against the glass. Squeegee from the center moving out, pushing bubbles and wrinkles out as you go. Step 8: In one smooth, continuous motion, trim the excess film from the edges using a hard card and a razor knife.

ASIN

B0BDWK7CNQ

Embedding

CLIP ViT-L/14 · 768d

Distance metric

cosine

Doc fetch

2ms·cache hitGET /v2/namespaces/amazon-products/documents/B0BDWK7CNQ

Similar query

92msre-embed title → /query

Doc fetch goes through Layer's Aerospike pull-through cache; cache hit served the row without touching turbopuffer. The similar query re-embeds this product's title with CLIP-text and runs a vector query — queries don't go through the doc cache, so no cache header is set.