4.3inch DSI LCD Display with Case for Raspberry Pi 4B, 800×480 Capacitive Touchscreen MIPI DSI Display Support Raspbian/Ubuntu/Kali/Retropie/WIN10 IoT, Driver Free, Refresh Rate up to 60Hz

Introduction 4.3inch Capacitive Touch Display For Raspberry Pi 4B, With Protection Case, 800×480, IPS Wide Angle, MIPI DSI Interface Features 1) 4.3inch IPS screen. 800x480 hardware resolution, toughened glass panel, with protection case 2) Capacitive touch panel, support 5-point touch 3) Supports Pi 4B 4) DSI interface, refresh rate up to 60Hz 5) Supports Raspbian, 5-points touch, driver free 6) Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free 7) Supports Retropie, driver free Software setting 1) Download image (Raspbian, Ubuntu, Kali, or WIN 10 IOT) from the Raspberry Pi website. 2) Download the compressed file to the PC, and unzip it to get the .img file. 3) Connect the TF card to the PC, use SDFormatter.exe software to format the TF card. 4) Open the Win32DiskImager.exe software, select the system image downloaded in step 2, and click 'Write' to write the system image. 5) After the image has finished writing, save and quit the TF card safely. 6) Power on the Raspberry Pi and wait for a few seconds until the LCD displays normally. And the touch function can also work after the system starts. Package Content 4.3inch DSI LCD x1 Black Case kit x1 Cooling Fan x1 Screws pack x1 Screwdriver x1

ASIN

B09PBVTZD8

Embedding

CLIP ViT-L/14 · 768d

Distance metric

cosine

Doc fetch

5ms·cache hitGET /v2/namespaces/amazon-products/documents/B09PBVTZD8

Similar query

31msre-embed title → /query

Doc fetch goes through Layer's Aerospike pull-through cache; cache hit served the row without touching turbopuffer. The similar query re-embeds this product's title with CLIP-text and runs a vector query — queries don't go through the doc cache, so no cache header is set.