10mm LED Strip to Wire Connector 2 Pin(5 PCS) With 20 AWG UL Listed Extension Wire (9.8 Feet/3 Meter),DIY Strip to Power Pigtail or Strip to Strip Jumper,NON-WATERPROOF

NOT for PU or Epoxy Waterproof -You can DIY both strip to strip bridge(jumper) and strip to power connector wire(pigtail) that is up to 3 meter long.Use it to extend strip light in different gap length and angles (mostly L shape 90 degree),flame retardant housing,copper pin,coolly work with 5A current(3V,5V,12V,24V) APPLICABILITY -Make sure your strip light match this connector.1.protection type:IP20 Non-waterproof or real silicon waterproof,not for pu or epoxy cover waterproof,please check before you order. 2.single color 10mm wide SMD5050 / SMD5630 / SMD5730 strip light ranging 30~90 LEDs per meter or 120 * SMD2835/ 3014 /2216 /2010 per meter. 3.Support normal thickness double side back tape, red thick 3M VHB foam and blue thermal conductive tape PIERCE TO CONTACT -Each of the 5 splicers has 2 ends,one end is for 10mm flex tape light(both IP20 and SILICON waterproof compatible),when snapping the cover, the pins can penetrate PCB from strip's back side, another end is for the 2 pin wire coming with,snapping the cover, the pins(blades) will cut into cable insulation to contact the wire core. No need soldering,no need stripping silicon waterproof cover and no need stripping wire insulation

ASIN

B082YW4Y1Z

Embedding

CLIP ViT-L/14 · 768d

Distance metric

cosine

Doc fetch

6ms·cache hitGET /v2/namespaces/amazon-products/documents/B082YW4Y1Z

Similar query

33msre-embed title → /query

Doc fetch goes through Layer's Aerospike pull-through cache; cache hit served the row without touching turbopuffer. The similar query re-embeds this product's title with CLIP-text and runs a vector query — queries don't go through the doc cache, so no cache header is set.