iFlight The Force 5.8GHz 48CH PIT/25mw/200mw/600mw VTX Transmitter with Pigtail + MMCX to SMA Female Connector Adapter for FPV Antenna for FPV Racing Drone

iFlight the Force 5.8G 48CH 0/25/100/200/400/600mW Switchable FPV Transmitter， support OSD Frequency and Power tuning, The output power is stable, the far transmission distance：≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW; Protocol: IRC Tramp Features: - Frequency lock fast, the boot does not interfere with companions; - Built-in output power self-check function; - Full format video format：NTSC /PAL; - Wide input voltage range. low power consumption; 7V～24V，+12V/260mA@600mW; - Small volume: 36mm×36mm×5mm; mounting holes correspond exactly CC3D NAZE32 F3 F4 Flying control - Lightweight: 4.3g(Does not contain antenna) Description: -Input voltage: 7-24V DC -Channel: 48 -Power transmission: 0mW / 25mW / 200mW / 400mW /600mW -Size (mm): 36*36mm -Weight: 4.3g(Does not contain antenna) -Connector type: MMCX Connector Smart Audio - OSD Frequency and Power tuning: Power the Force VTX by 7-24V, Connect the RX port on VTX to FC. Let's take iFlight REVO Bee F4 as an example, RX port on VTX connect to RX port on FC, Video IN on VTX connect to Video Out on FC. Bind Radio control to the receiver, receiver connect to FC finish setting and control via radio control, and open Betaflight, choose UART6 in Port configuration on Betaflight, IRC Tramp on Peripherals position, click save. And now, connection and debug on Betaflight is finished. Now you can debug via radio control, pull the throttle to middle, Yaw to far left, Pitch to top, and now there will be debugging interface popup, Pitch up/down as choose, Yaw left-right as confirm and quit, you can set PID, OSD, Frequency and channel, VTX power, after finishing setting you can quit and fly. Package list: 1 x The Force 5.8GHz PIT/25mw/200mw/600mw VTX 1 x 1.25T 5Pin connecting cable 1 x  MMCX-SMA pigtail cable 1 x MMCX Transmitting Antenna

ASIN

B082F4LJ8S

Embedding

CLIP ViT-L/14 · 768d

Distance metric

cosine

Doc fetch

19ms·cache hitGET /v2/namespaces/amazon-products/documents/B082F4LJ8S

Similar query

75msre-embed title → /query

Doc fetch goes through Layer's Aerospike pull-through cache; cache hit served the row without touching turbopuffer. The similar query re-embeds this product's title with CLIP-text and runs a vector query — queries don't go through the doc cache, so no cache header is set.