DROK® DC-DC Adjustable 3A Buck Voltage Converter Stabilizer Step Down Voltage Reducer Regulator Power Module with Protective Shell 5-23V to 0-16.5V Dual Volt Amp LCD Display

Parameters: Input voltage: 5~23V, recommend the use of within 20V. (Input voltage must be 1V higher than the output voltage. ) Output voltage: 0~16. 5V, continuously adjustable. (Automatically saves the last set voltage. ) Output current: 3A Peak, recommend the use of within 2A. (Over 2A, please enhance heat dissipation. ) Accuracy: 1% High conversion efficiency: up to 95% Load regulation: S (I) ≤0. 8% Voltage regulation: S (u) ≤0. 8% Size: 62 x 44 x 18mm Weight: 45g Calibration instructions: The module has calibration function, no need to worry if the measurement is not accurate. If you find that the measuring values are not accurate or values are stuck, and left and right buttons can not adjust voltage, please do as follow: Calibration method: First, in the case of power off, press and hold the left button and access to power, then the display starts flashing, release the button. Next, measure the output voltage with a multimeter and press the left and right button to adjust the value until the multimeter displays close to 5V, such as 4. 98V, 5. 02V. Finally, access to power, then the calibration is complete. Error can be less than 0. 04V, if the error is larger, you can try again. Package included: 1 x DC-DC Adjustable Step-down Power Supply Module

ASIN

B01FQGFXS6

Embedding

CLIP ViT-L/14 · 768d

Distance metric

cosine

Doc fetch

12ms·cache hitGET /v2/namespaces/amazon-products/documents/B01FQGFXS6

Similar query

57msre-embed title → /query

Doc fetch goes through Layer's Aerospike pull-through cache; cache hit served the row without touching turbopuffer. The similar query re-embeds this product's title with CLIP-text and runs a vector query — queries don't go through the doc cache, so no cache header is set.